How to run Tezos¶
In this section we discuss how to take part in the protocol that runs the network. There are two main ways to participate in the consensus, delegating your coins and running a delegate. To learn more about the protocol refer to this section.
Delegating your coins¶
If you don’t want to deal with the complexity of running your own delegate, you can always take part in the protocol by delegating your coins to one.
Implicit accounts cannot have a delegate, so the first step is to originate an account, transfer your tez there and set a delegate. Notice that an originated account is a special case of a contract without code, so it is still necessary to pay for its small storage (see originated_account).
tezos-client originate account alice_del for alice \ transferring 1000 from alice \ --delegate bob
As done before, we originate a contract alice_del with manager
alice and we fund it with 1kꜩ. The interesting part here is setting the
delegate to bob, as the delegate is not set by default when originating a
contract. If you already own contracts that are delegatable you can change the
delegate with the command
Notice that, by default, an originated account is not delegatable,
which means that you can’t change the delegate once the contract is
originated, even if you initially set a delegate.
To be able to change the delegate latter, add the
Notice that only implicit accounts can be delegates, so your delegate must be a tz1 address.
Funds in implicit accounts which are not registered as delegates do not participate in baking.
Running a delegate¶
A delegate is responsible for baking blocks, endorsing blocks and accusing other delegates in case they try to double bake or double endorse.
In the network, rights for baking and endorsing are randomly assigned to delegates proportionally to the number of rolls they have been delegated. A roll is just a block of 10kꜩ and all computations with rolls are rounded to the nearest lower integer e.g. if you have 16kꜩ it amounts to 1 roll.
When you obtain coins from the faucet, if you are lucky to obtain more than one roll, you can register a delegate using this identity. Otherwise, you need to ask the faucet for more accounts, originate an account for each one and delegate them to the first.
Deposits and over-delegation¶
When baking or endorsing a block, a security deposit (or bond) is
preserved_cycles cycles from the account of the
Hence a delegate must have enough funds to be able to pay security
deposits for all the blocks it can potentially bake/endorse during
The current deposits are 512ꜩ for baked block and 64ꜩ for
Note that being delegated coins doesn’t mean that a delegate can spend
them, they only add up to its rolls count while all the deposits must
come from the delegate’s account.
If a delegate runs out of funds to deposit it won’t be able to bake or endorse. Other than being a missed opportunity for them, this has also negative consequences on the network. Missing baking slots slows the network, as it is necessary to wait one minute for the baker at priority 2 to bake, while missing endorsements reduce the fitness of the chain, making it more susceptible to forks. Running out of funds can happen if a delegate is over-delegated, that is if the amount of rolls it was delegate is disproportionate with respect to its available funds. It is the responsibility of every delegator to make sure a delegate is not already over-delegated (a delegate cannot refuse a delegation) and each delegate should plan carefully its deposits.
Expected rights, deposits and rewards¶
Let’s assume we have 1 roll, we want to estimate our chances to bake
or endorse in order to prepare the funds for our deposits.
Our chances depend on how many rolls are currently active in the
network, once we know that we can estimate how many blocks and
endorsements we could be assigned in a cycle.
The number of active rolls can be computed with two RPCs, first we
list all the active delegates with
delegates?active, then we sum
stacking_balance and we simply divide by the size of a
At the time of writing, on Betanet the number of active rolls is ~30k
so for each block we know that the chance that we get selected for
1/30k while for endorsing is 32 times that.
Given that every draw is with replacement, the distribution that
describes our chances of being selected is the binomial with
probability of success
The distribution has another parameter
n for the number of times
we draw, in our case in a cycle the draws for baking are
4096 while for endorsing are
n_e = 4096 * 32.
Moreover we could extend
n to cover
preserved_cycles = 5.
Once we have
n, the expected number of times that we
might get selected is
p * n (the mean of the distribution).
Over many cycles our chances will fall around the mean, in some cycles
we might get unlucky and be assigned fewer rights, but in some cycles we might
get lucky and be assigned more rights!
Clearly we would like to plan ahead and have enough deposits to cover
also the “lucky” cycles so we need to compute a sort of “maximum”
number of rights that is safe for most cases.
We can compute this maximum using the inverse of Cumulative
Distribution Function of the Binomial where most cases is a value of
confidence that we can put to 95%.
There a simple Python
that does the computation for us and returns the deposits and rewards,
expected and maximum, for a cycle and for preserved_cycles.
prob success 3.333333e-05 confidence 0.95 ----------one-cycle-------------------- blocks mean 0.14 max 1.00 endorsements mean 4.37 max 8.00 deposits mean 69.91 + 279.62 max 512.00 + 512.00 rewards mean 2.18 + 8.74 max 16.00 + 16.00 ----------preserved-cycles------------- blocks mean 0.68 max 2.00 endorsements mean 21.85 max 30.00 deposits mean 349.53 + 1398.10 max 1024.00 + 1920.00 rewards mean 10.92 + 43.69 max 32.00 + 60.00
As a rule of thumb if we want to have a very high confidence that we won’t miss any opportunity we should have around ~3kꜩ for deposits, on the other hand the expected returns will probably be around ~10ꜩ per cycle.
preserved_cycles, not only does the delegate take back control of
its frozen deposits, but it also receives the rewards for its hard work
which amount to 16ꜩ to bake a block and
2ꜩ / <block_priority> for
endorsing a block.
Additionally a baker also receives the fees of the operations it
included in its blocks.
While fees are unfrozen after
preserved_cycles like deposits and
rewards, they participate in the staking balance of the delegate
immediately after the block has been baked.
Register and check your rights¶
In order to run a delegate you first need to register as one using your implicit account:
tezos-client register key bob as delegate
Once registered, you need to wait
preserved_cycles + 2 = 7 cycles
for your rights to be considered.
There is a simple rpc that can be used to check your rights for every cycle, up to 5 cycles in the future.
tezos-client rpc get /chains/main/blocks/head/helpers/baking_rights\?cycle=300\&delegate=tz1_xxxxxxxxxxx\&max_priority=2
Sometimes a delegate skips its turn so it is worth considering also baking rights at priority 2 like in the example above. There is no priority for endorsements, every missed endorsement is lost.
If a delegate doesn’t show any sign of activity for preserved_cycles it is marked inactive and its rights are removed. This mechanism is important to remove inactive delegates and reallocate their rights to the active ones so that the network is always working smoothly. Normally even a baker with one single roll should perform enough operations during 5 cycles to remain active. If for some reason your delegate is marked inactive you can reactivate it simply by re-registering again like above.
The baker is a daemon that once connected to an account, computes the baking rights for that account, collects transactions from the mempool and bakes a block. Note that the baker is the only program that needs direct access to the node data directory for performance reasons.
Let’s launch the daemon pointing to the standard node directory and baking for user bob:
tezos-baker-alpha run with local node ~/.tezos-node bob
The endorser is a daemon that once connected to an account, computes the endorsing rights for that account and, upon reception of a new block, verifies the validity of the block and emits an endorsement operation. It can endorse for a specific account or if omitted it endorses for all accounts.
The accuser is a daemon that monitors all blocks received on all chains and looks for:
- bakers who signed two blocks at the same level
- endorsers who injected more than one endorsement operation for the same baking slot (more details here)
Upon finding such irregularity, it will emit respectively a double-baking or double-endorsing denunciation operation, which will cause the offender to loose its security deposit.
Remember that having two bakers or endorsers running connected to the same account could lead to double baking/endorsing and the loss of all your bonds. If you are worried about availability of your node when it is its turn to bake/endorse, there are other ways than duplicating your credentials. Never use the same account on two daemons.
The docker image runs the daemons by default for all your keys. To know if you baked, just run:
./alphanet.sh baker log ./alphanet.sh endorser log
You should see lines such as:
Injected block BLxzbB7PBW1axq for bootstrap5 after BLSrg4dXzL2aqq (level 1381, slot 0, fitness 00::0000000000005441, operations 21)
Injected endorsement for block 'BLSrg4dXzL2aqq' (level 1381, slot 3, contract bootstrap5) 'oo524wKiEWBoPD'