The consensus algorithm

This document provides a high-level description of Tenderbake, the Tezos proof-of-stake consensus algorithm.


Before Tenderbake, there was Emmy*, a Nakamoto-style consensus consisting of a series of improvements of the one in the Tezos whitepaper.

Emmy*, like any Nakamoto-style consensus algorithm (such as Bitcoin or Ouroboros), offers probabilistic finality: forks of arbitrary length are possible but they collapse with a probability that increases rapidly with fork length.

Tenderbake instead, like any classic BFT-style consensus algorithm (such as PBFT or Tendermint), offers deterministic finality: a block that has just been appended to the chain of some node is known to be final once it has two additional blocks on top of it, regardless of network latency.


The starting point for Tenderbake is Tendermint, the first classic-style algorithm for blockchains.

Tenderbake adapts Tendermint to the Tezos blockchain, but the adjustments required are substantive:

  • Tenderbake is tailored to match the Tezos architecture by using only communication primitives and network assumptions which Tezos supports.

  • Tenderbake makes weaker network assumptions than Tendermint, at the price of adding the extra assumption that participants have loosely synchronized clocks — which is fine, because Tezos already uses them.

The design of Tenderbake and its rationale are described at length in the technical report and in a Nomadic Labs’s blog post. Here we only provide a user/developer perspective.

Tenderbake is executed for each new block level by a “committee” whose members are called validators, which are delegates selected at random based on their stake, in the same way as endorsers are selected in Emmy*. We let CONSENSUS_COMMITTEE_SIZE be the number of validator slots per level. Furthermore, we use CONSENSUS_THRESHOLD to denote two thirds of CONSENSUS_COMMITTEE_SIZE.

For each level, Tenderbake proceeds in rounds. Each round represents an attempt by the validators to agree on the content of the block for the current level, that is, on the sequence of non-consensus operations the block contains. We call this sequence the block’s payload.

Each round has an associated duration. Round durations are set to increase so that for any possible message delay, there is a round that is sufficiently long for all required messages to be exchanged. Round durations depend on protocol parameters MINIMAL_BLOCK_DELAY and DELAY_INCREMENT_PER_ROUND. These parameters specify round durations as follows:

\[\begin{split}round\_duration(0) &= minimal\_block\_delay \\ round\_duration(r+1) &= round\_duration(r) + delay\_increment\_per\_round \\ & = minimal\_block\_delay + (r + 1) * delay\_increment\_per\_round\end{split}\]

Round durations thus increase linearly with DELAY_INCREMENT_PER_ROUND.

Schematically, a round consists in the following steps:

  • a validator designated for that round injects a candidate block (representing a proposal) and consensus operations (representing votes) into the node to which it is attached, which then

  • diffuses those blocks and consensus operations to other nodes of the network, and thus

  • communicates them to the validators attached to those nodes, to carry out voting on which block to accept.

Unlike Emmy*, Tenderbake has two types of votes: before endorsing a block b, a validator preendorses b. Furthermore, to be able to endorse, a validator must have observed a preendorsement quorum, that is a set of preendorsements from validators having at least CONSENSUS_THRESHOLD validator slots. Similarly, to be able to decide, a validator must have observed an endorsement quorum, that is, a set of endorsements from validators having at least CONSENSUS_THRESHOLD validator slots. The endorsement quorum for a block b is included in a block b' on top of b, serving as a certification that b has been agreed upon. We also say that block b' confirms block b.

The validator’s whose turn is to inject a candidate block at a given round is called the proposer at that round. Proposers in Tenderbake are selected similarly to bakers in Emmy*: the proposer at round r is the validator who has the validator slot r. A proposer who has observed a preendorsement quorum for a candidate block in a previous round, is required to propose a block with the same payload as the initial block. We talk about a re-proposal in this case.

Transaction and block finality

A transaction is final as soon as the block including it has a confirmation (that is, a block on top of it). Indeed, as hinted above, a block contains the certification (that is, the endorsement quorum) for the previous payload. Thanks to the endorsement quorum, Tenderbake guarantees transaction finality after 1 confirmation.

It may be possible that different validators decide at different rounds, though on the same payload. The blocks at these different rounds differ precisely because they contain, in the header, as part of the block fitness, the round at which they were proposed. Among these “candidate” blocks, the block with the smallest round has the highest fitness and so it will be the one decided. Consequently, to agree on a block, that is, on both the payload and the header, Tenderbake needs one more confirmation, and thus guarantees block finality after 2 confirmations.

Time between blocks

The time between blocks represents the difference between the timestamps of the blocks. The timestamp of a block is given by the beginning of the round at which the block has been agreed upon. Thus, the time between blocks depends on the round at which decisions are taken. For example, if the decision at the previous level was taken at round 4 and at the current level at round 2, then the current block’s delay relative to its predecessor, is \(round\_duration(4) + round\_duration(0) + round\_duration(1)\). The general case is as follows, say that the decision at the previous level is taken at round m and the decision at the current level is taken at round n, then the current block’s delay relative to its predecessor is \(round\_duration(m) + \sum_{i=0}^{n-1} round\_duration(i)\). We note that, under normal network conditions, and with active and compliant validators, decisions should be taken at round 0, meaning that the time between blocks would be \(round\_duration(0)\) seconds i.e., parameter MINIMAL_BLOCK_DELAY.

Validator selection: staking balance, active stake, and frozen deposits

Validator selection is based on the stake, as in Emmy*, with the exception that it is based on the delegate’s active stake instead of its staking balance. Let us first (re)define these and related concepts.

  • The (maximal) staking balance of a delegate is its full balance (i.e. all the tokens owned by the delegate) plus the balances of all accounts that have delegated to it. It must be at least TOKENS_PER_ROLL tez, otherwise the delegate cannot be selected as a validator.

  • The active stake of a delegate is the amount of tez with which it participates in consensus. It is at most its staking balance. We explain below how it is computed.

  • The frozen deposit represents a percentage FROZEN_DEPOSIT_PERCENTAGE of the maximum active stake during the last PRESERVED_CYCLES + MAX_SLASHING_PERIOD. This amount represents the delegate’s skin in the game: in the case that the delegate behaves badly, its frozen deposit is partly slashed (see Slashing). Taking the maximum over an interval of cycles (instead of just considering the active stake at the cycle where the bad action can occur) allows to avoid situations where a malicious delegate empties its accounts between the time when rights are attributed and the time when the deposit is frozen. The frozen deposits are updated at the end of each cycle.

  • The spendable balance of a delegate is its full balance minus the frozen deposits.

We state next the RPCs which allow to retrieve these types of balances, and also some invariants about them (Note that these are just invariants, not definitions; for instance, the frozen deposits are computed in terms of the full balance, not the other way around.):

  • delegated balance represents the total amount of tokens delegated by others to a given delegate; it excludes the delegate’s full balance; it is obtained with ../context/delegates/<pkh>/delegated_balance

  • staking balance = full balance + delegated balance; it is obtained with ../context/delegates/<pkh>/staking_balance

  • full balance = spendable balance + frozen deposit; it is obtained with ../context/delegates/<pkh>/full_balance

  • frozen deposit is obtained with ../context/delegates/<pkh>/frozen_deposits

  • spendable balance is obtained with ../context/contracts/<pkh>/balance

Delegates can set an upper limit to their frozen deposits with the command tezos-client set deposits limit for <delegate> to <deposit_limit>, and unset this limit with the command tezos-client unset deposits limit for <delegate>. These commands are implemented using a new manager operation Set_deposits_limit. When emitting such a command in cycle c, it affects the active stake for cycles starting with c + PRESERVED_CYCLES + 1; the new active stake is taken into account when computing the frozen deposit for cycle c+1 already, however the user may see an update to its frozen deposit at cycle c + PRESERVED_CYCLES + MAX_SLASHING_PERIOD at the latest (because up to that cycle the frozen deposit also depends on the active stake at cycles before cycle c+1).

The active stake is computed PRESERVED_CYCLES in advance: at the end of cycle c for cycle c + 1 + PRESERVED_CYCLES (as in Emmy*), before updating the delegates’ activity status.

Intuitively, the active stake is set to 10 times the delegate’s chosen frozen deposit limit, without going beyond its available staking balance, nor its maximum staking capacity (determined by its full balance). More precisely, the active stake is the minimum between:

  • the delegate’s staking balance, and

  • 10 times the delegate’s deposit cap, i.e. deposit_cap * 100 / deposit_percentage. If the delegate has not set a frozen deposit limit, deposit_cap is its full balance. Otherwise deposit_cap is the minimum between its full balance and the frozen deposit limit set by the delegate.

Let’s take some examples. Say that the full balance of a delegate is 1000 tez. Then its theoretical maximum staking balance is 10000 tez. The following table lists some scenarios (assuming for simplicity no changes in the delegate’s full and staking balances during the last 8 cycles).

Staking balance

Frozen deposit limit

Active stake

Frozen deposit

Spendable balance



















We note in passing that this new schema basically solves the main problem of over-delegation: a delegate will not fail anymore to bake and endorse because of an insufficient balance to pay the deposit. However, a delegate can still be over-delegated, and it will be rewarded based on its active stake, not on its staking balance.

Economic Incentives

As Emmy*, Tenderbake rewards participation in consensus and punishes bad behavior. Notable changes however are as follows:

  • Fees and baking rewards go to the payload producer, the one who selected the transactions to be included in the block (and was the first to propose a block with that payload). In case of re-proposal, the payload producer might be different from the block proposer, the baker who injects the block.

  • Including extra endorsements, that is, more than the minimal required to obtain a quorum, is rewarded with a bonus.

  • Endorsing rewards are shared equally among all validators. Participation above a minimal threshold per cycle is however required.

  • Deposits are no longer frozen and unfrozen, instead a percentage of the active stake is always locked.

  • Validators are rewarded instantaneously for baking blocks and including extra endorsements, and not at the end of the cycle like in Emmy*.

  • At the end of a cycle c, the following actions happen:

    • the selection of the consensus committee cycle c + PRESERVED_CYCLES, based on the current active stake distribution,

    • the distribution of endorsing rewards,

    • the adjustment of frozen deposits.


The fees associated to the transactions included in a block go to the payload producer. This is only natural given that this is the validator that selects the transactions to be included; see an in-depth blog post for further motivation.

The payload producer is usually the same delegate as the block proposer (that is, the one that signs and injects the block): that’s always true for blocks at round 0; however, in case of re-proposals this is not necessarily the case (see the algorithm description above).

Fees are given to the payload producer immediately, that is, they are already reflected in the blockchain state obtained after applying the injected block.


There are three kinds of rewards: baking rewards, endorsing rewards, and a bonus for including extra endorsements.

The baking rewards are treated in the same way as fees: they go to the payload producer and are distributed immediately.

To encourage fairness and participation, the block proposer receives a bonus for the extra endorsements it includes in the block. The bonus is proportional to the number of validator slots above the threshold of \(\lceil CONSENSUS\_COMMITTEE\_SIZE \times \frac{2}{3} \rceil\) that the included endorsements represent. The bonus is also distributed immediately.

The endorsing rewards are distributed at the end of the cycle. The endorsing reward may be received even if not all of the validator’s endorsements are included in a block and is proportional to the validator’s active stake (in other words, to its expected number of validator slots, and not its actual number of slots). However, two conditions must be met:

  • the validator has revealed its nonce, and

  • the validator has been present during the cycle.

Not giving rewards in case of missing revelations is not new as it is adapted from Emmy*. The second condition is new. We say that a delegate is present during a cycle if the endorsing power (that is, the number of validator slots at the corresponding level) of all the endorsements included by the delegate during the cycle represents at least MINIMAL_PARTICIPATION_RATIO of the delegate’s expected number of validator slots for the current cycle (which is BLOCKS_PER_CYCLE * CONSENSUS_COMMITTEE_SIZE * active_stake / total_active_stake).

Regarding the concrete values for rewards, we first fix the total reward per level, call it total_rewards, to 80 / blocks_per_minute tez. Assuming blocks_per_minute = 2, total_rewards is 40 tez. We define:

  • BAKING_REWARD_FIXED_PORTION := baking_reward_ratio * total_rewards

  • bonus := (1 - baking_reward_ratio) * bonus_ratio * total_rewards is the max bonus

  • endorsing_reward := (1 - baking_reward_ratio) * (1 - bonus_ratio) * total_rewards


  • baking_reward_ratio to 1 / 4,

  • bonus_ratio to 1 / 3.

Thus, we obtain BAKING_REWARD_FIXED_PORTION = 10 tez, (maximum) bonus = 10 tez, and endorsing_rewards = 20 tez. The bonus per additional endorsement slot is in turn bonus / (CONSENSUS_COMMITTEE_SIZE / 3) (because there are at most CONSENSUS_COMMITTEE_SIZE / 3 validator slots corresponding to the additional endorsements included in a block). The rewards per endorsement slot are endorsing_rewards / CONSENSUS_COMMITTEE_SIZE. Assuming CONSENSUS_COMMITTEE_SIZE = 7000, we obtain a bonus per slot of 10 / (7000 / 3) = 0.004286 tez and an endorsing rewards per slot of 20 / 7000 = 0.002857 tez.

Let’s take an example. Say a block has round 1, is proposed by delegate B, and contains the payload from round 0 produced by delegate A. Also, B includes endorsements with endorsing power 5251. Then A receives the fees and 10 tez (the BAKING_REWARD_FIXED_PORTION) as a reward for producing the block’s payload. Concerning the bonus, given that CONSENSUS_COMMITTEE_SIZE = 7000, the minimum required validator slots is 4667, and there are 2333 = 7000 - 4667 additional validator slots. Therefore B receives the bonus (5251 - 4667) * 0.004286 = 2.503 tez. (Note that B only included endorsements corresponding to 584 = 5251 - 4667 additional validator slots, about a quarter of the maximum 2333 extra endorsements it could have theoretically included.) Finally, consider some delegate C, whose active stake at some cycle is 5% of the total stake. Note that his expected number of validator slots for that cycle is 5/100 * 8192 * 7000 = 2,867,200 slots. Assume also that the endorsing power of C’s endorsements included during that cycle has been 3,123,456 slots. Given that this number is bigger than the minimum required (2,867,200 * 2 / 3), it receives an endorsing reward of 2,867,200 * 0.002857 = 8191.59 tez for that cycle.


Like in Emmy*, not revealing nonces and double signing are punishable. If a validator does not reveal its nonce by the end of the cycle, it does not receive its endorsing rewards. If a validator double signs, that is, it double bakes (which means signing different blocks at the same level and same round) or it double (pre)endorses (which means voting on two different proposals at the same level and round), the frozen deposit is slashed. The slashed amount for double baking is DOUBLE_BAKING_PUNISHMENT. The slashed amount for double (pre)endorsing is a fixed percentage RATIO_OF_FROZEN_DEPOSITS_SLASHED_PER_DOUBLE_ENDORSEMENT of the frozen deposit. The payload producer that includes the misbehavior evidence is rewarded half of the slashed amount.

The evidence for double signing at a given level can be collected by any accuser and included as an accusation operation in a block for a period of MAX_SLASHING_PERIOD.

We note that selfish baking is not an issue in Tenderbake: say we are at round r and the validator which is proposer at round r+1 does not (pre)endorse at round r in the hope that the block at round r is not agreed upon and its turn comes to propose at round r+1. Under the assumption that the correct validators have more than two thirds of the total stake, these correct validators have sufficient power for agreement to be reached, thus the lack of participation of a selfish baker does not have an impact.

Shell-protocol interaction revisited

Recall that, for the shell to interact with the economic protocol, two notions are defined abstractly at the level of the shell and made concrete at the level of the consensus protocol. Namely, these two notions are the protocol-specific header and the fitness. As in Emmy*, the protocol-specific header contains the fields:

  • signature: a digital signature of the shell and protocol headers (excluding the signature itself)

  • seed_nonce_hash: a commitment to a random number, used to generate entropy on the chain

  • proof_of_work_nonce: a nonce used to pass a low-difficulty proof-of-work for the block, as a spam prevention measure

  • liquidity_baking_toggle_vote: a vote to continue the Liquidity Baking Subsidy, stop it, or abstain.

There are two additional fields: payload_hash and payload_round which are needed for establishing if a block is final.

The fitness is given by the tuple (version, level, locked_round, - predecessor_round - 1, round). The current version of the fitness is 2 (version 0 was used by Emmy, and version 1 by Emmy+ and Emmy*). The fitness encapsulates more information than in Emmy* because Tenderbake is more complex: recall that blocks at the last level only represent candidate blocks. In Emmy*, only the level mattered. But in Tenderbake, we need to, for instance, allow for new blocks at the same level to be accepted by nodes. Therefore the fitness also includes the block’s round (as the fifth component). Furthermore, we also allow to change the predecessor block when it has a smaller round. Therefore the fitness also includes the opposite of predecessor block’s round as the forth component (the predecessor is taken for technical reasons). Finally, to (partially) enforce the rule on re-proposals, the fitness also includes, as the third component, the round at which a preendorsement quorum was observed by the baker, if any (this component can therefore be empty). By the way, preendorsements are present in a block if and only if the locked round component is non-empty and if so, the locked round has to match the round of the included preendorsements.

Next, we provide two examples of fitness values: 02::00001000::::ffffffff::00000000 and 02::00001000::00000000::fffffffe::00000001 (in the hexadecimal format that one may observe in the node’s logs). These two values have the following components:

  • the 1st component, 02, is the fitness version;

  • the 2nd component, 00001000, is the block’s level (level 4096);

  • the 3rd component is the block’s locked round: empty in the first case, 0 in the second;

  • the 4th component is the round of the predecessor block, here 0 in the first case and 1 in the second case;

  • the 5th component is the block’s round: 0 in the first case, 1 in the second case.

We recall (see Shell header) that the fitness is, from the shell’s perspective, a sequence of sequences of unsigned bytes and comparison is done first by the length of the sequence and then lexicographically (both for the outer sequence, and for each of the inner sequences). So the first fitness is smaller than the second one, because of the third component, the empty bitstring being smaller than any other bitstring.

Further External Resources